Bedien- und Anzeigegerät für Gefahrenmeldesystem

Operating and display device for intrusion detection system

Uređaj za upravljanje i prikazivanje sustava za otkrivanje upada

Alarm installations, emergency call and signalling

Alarmne instalacije, dojava i signalizacija

Alarminstallaties, noodoproep- en meldingssystemen

used to operate and display the information of the system states of the GM/A 8.1 KNX Security Panel. System messages are displayed on a four-line LCD display. The multifunction and special keys mean that all the system functions can be operated easily. Safety-relevant functions are protected by a user PIN. Fife Keypads can be connected to each Security Panel. There is no need for an external voltage supply, the keypads are supplied via the Keypad-Bus. The device can be used in systems with increased system requirements according to VdS Class A, B and C, DIN VDE 0833 Level 1, 2 and 3 and EN 50131/IEC 62642 Level 1, 2 and 3.

[The remote control is a mobile system device used to manage the anti-intrusion system in the simplest way. It has 5 fully configurable keys with numerical identification][each of them can be confiured to arm/disarm the anti-intrusion zones, but also to trigger secial functions such as anti-theft alarm, panic alarm, first aid alarm. All the keys are equipped with fully configurable LEDs.Spare lithium button battery, 3V (CR2032) normally available on the market.]

The remote control is a mobile system device used to manage the anti-intrusion system in the simplest way. It has 5 with symbolic identification.One key is freely configurable and the other 4 keys are pre-configured with the following functions: external arming, internal arming, disarming and panic alarm. All the keys are equipped with LEDs.Spare lithium button battery, 3V (CR2032) are normally available on the market.