1SDA071122R1 | E4.2V 2500 EKIP DIP LSI 3P FHR
Code: 1614138
Details
- •Low-voltage industrial components
- •Power circuit-breaker for trafo/generator/installation protection
- •1 KOM
- •ABB
Technical specifications
With integrated under voltage releaseNo
Rated permanent current Iu2500A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz150kA
Rated voltage690 - 690V
Overload release current setting1000.0 - 2500A
Adjustment range undelayed short-circuit release3750.0 - 37500A
Adjustment range short-term delayed short-circuit release1500.0 - 25000A
Integrated earth fault protectionNo
Type of electrical connection of main circuitBolt connection
Device constructionBuilt-in device fixed built-in technique
Suitable for DIN rail (top hat rail) mountingNo
Number of auxiliary contacts as change-over contact4
With switched-off indicatorYes
Number of auxiliary contacts as normally closed contact0
DIN rail (top hat rail) mounting optionalNo
Number of auxiliary contacts as normally open contact0
Position of connection for main current circuitBack side
Number of poles3
Motor drive integratedNo
Motor drive optionalYes
Degree of protection (IP)IP30
Complete device with protection unitYes
Type of control elementPush button
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user
1SDA071122R1 | E4.2V 2500 EKIP DIP LSI 3P FHR
Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- ABB
DetailsTechnical specifications
Technical specifications
With integrated under voltage release
Rated permanent current Iu
2500A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
150kA
Rated voltage
690 .. 690V
Overload release current setting
1000.0 .. 2500A
Adjustment range undelayed short-circuit release
3750.0 .. 37500A
Adjustment range short-term delayed short-circuit release
1500.0 .. 25000A
Integrated earth fault protection
Type of electrical connection of main circuit
Bolt connection
Device construction
Built-in device fixed built-in technique
Suitable for DIN rail (top hat rail) mounting
Number of auxiliary contacts as change-over contact
4
With switched-off indicator
Number of auxiliary contacts as normally closed contact
0
DIN rail (top hat rail) mounting optional
Number of auxiliary contacts as normally open contact
0
Position of connection for main current circuit
Back side
Number of poles
3
Motor drive integrated
Motor drive optional
Degree of protection (IP)
IP30
Complete device with protection unit
Type of control element
Push button
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user.