1SDA071191R1 | E4.2N 4000 EKIP DIP LI 3P FHR
Code: 1614187
Details
- •Low-voltage industrial components
- •Power circuit-breaker for trafo/generator/installation protection
- •1 KOM
- •ABB
Technical specifications
Adjustment range short-term delayed short-circuit release- - -A
With integrated under voltage releaseNo
Rated permanent current Iu4000A
Adjustment range undelayed short-circuit release6000.0 - 60000A
Rated voltage690 - 690V
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz66kA
Overload release current setting1600.0 - 4000A
Type of electrical connection of main circuitBolt connection
Integrated earth fault protectionNo
Degree of protection (IP)IP30
Suitable for DIN rail (top hat rail) mountingNo
Device constructionBuilt-in device fixed built-in technique
DIN rail (top hat rail) mounting optionalNo
Number of auxiliary contacts as normally open contact0
Type of control elementPush button
Motor drive integratedNo
With switched-off indicatorYes
Number of auxiliary contacts as change-over contact4
Complete device with protection unitYes
Motor drive optionalYes
Position of connection for main current circuitBack side
Number of poles3
Number of auxiliary contacts as normally closed contact0
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user
1SDA071191R1 | E4.2N 4000 EKIP DIP LI 3P FHR
Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- ABB
DetailsTechnical specifications
Technical specifications
Adjustment range short-term delayed short-circuit release
- .. -A
With integrated under voltage release
Rated permanent current Iu
4000A
Adjustment range undelayed short-circuit release
6000.0 .. 60000A
Rated voltage
690 .. 690V
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
66kA
Overload release current setting
1600.0 .. 4000A
Type of electrical connection of main circuit
Bolt connection
Integrated earth fault protection
Degree of protection (IP)
IP30
Suitable for DIN rail (top hat rail) mounting
Device construction
Built-in device fixed built-in technique
DIN rail (top hat rail) mounting optional
Number of auxiliary contacts as normally open contact
0
Type of control element
Push button
Motor drive integrated
With switched-off indicator
Number of auxiliary contacts as change-over contact
4
Complete device with protection unit
Motor drive optional
Position of connection for main current circuit
Back side
Number of poles
3
Number of auxiliary contacts as normally closed contact
0
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user.