1SDA071474R1 | E1.2N 1250 EKIP TOUCH LI 4P F F
Code: 1614410
Details
- •Low-voltage industrial components
- •Power circuit-breaker for trafo/generator/installation protection
- •1 KOM
- •ABB
Technical specifications
Adjustment range short-term delayed short-circuit release- - -A
With integrated under voltage releaseNo
Rated permanent current Iu1250A
Integrated earth fault protectionNo
Rated voltage690 - 690V
Number of auxiliary contacts as normally closed contact0
Adjustment range undelayed short-circuit release1875.0 - 18750A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz66kA
Number of poles4
With switched-off indicatorYes
Number of auxiliary contacts as normally open contact0
Number of auxiliary contacts as change-over contact4
Device constructionBuilt-in device fixed built-in technique
Position of connection for main current circuitBack side
Suitable for DIN rail (top hat rail) mountingNo
Type of control elementPush button
DIN rail (top hat rail) mounting optionalNo
Overload release current setting500.0 - 1250A
Complete device with protection unitYes
Type of electrical connection of main circuitBolt connection
Degree of protection (IP)IP30
Motor drive integratedNo
Motor drive optionalYes
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user
1SDA071474R1 | E1.2N 1250 EKIP TOUCH LI 4P F F
Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- ABB
DetailsTechnical specifications
Technical specifications
Adjustment range short-term delayed short-circuit release
- .. -A
With integrated under voltage release
Rated permanent current Iu
1250A
Integrated earth fault protection
Rated voltage
690 .. 690V
Number of auxiliary contacts as normally closed contact
0
Adjustment range undelayed short-circuit release
1875.0 .. 18750A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
66kA
Number of poles
4
With switched-off indicator
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as change-over contact
4
Device construction
Built-in device fixed built-in technique
Position of connection for main current circuit
Back side
Suitable for DIN rail (top hat rail) mounting
Type of control element
Push button
DIN rail (top hat rail) mounting optional
Overload release current setting
500.0 .. 1250A
Complete device with protection unit
Type of electrical connection of main circuit
Bolt connection
Degree of protection (IP)
IP30
Motor drive integrated
Motor drive optional
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user.