1SDA072101R1 | E1.2C 800 EKIP DIP LI 3P WMP
Code: 1614917
Details
- •Low-voltage industrial components
- •Power circuit-breaker for trafo/generator/installation protection
- •1 KOM
- •ABB
Technical specifications
Adjustment range short-term delayed short-circuit release- - -A
With integrated under voltage releaseNo
Rated voltage690 - 690V
Rated permanent current Iu800A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz50kA
Overload release current setting320.0 - 800A
Adjustment range undelayed short-circuit release1200.0 - 12000A
Integrated earth fault protectionNo
Type of electrical connection of main circuitConnection at separate chassis part
Device constructionBuilt-in device slide-in technique (withdrawable)
Number of auxiliary contacts as normally open contact0
Suitable for DIN rail (top hat rail) mountingNo
Number of auxiliary contacts as normally closed contact0
DIN rail (top hat rail) mounting optionalNo
Number of auxiliary contacts as change-over contact4
Number of poles3
Type of control elementPush button
With switched-off indicatorYes
Position of connection for main current circuitConnection at separate chassis part
Complete device with protection unitYes
Motor drive integratedNo
Degree of protection (IP)IP30
Motor drive optionalYes
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user
1SDA072101R1 | E1.2C 800 EKIP DIP LI 3P WMP
Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- ABB
DetailsTechnical specifications
Technical specifications
Adjustment range short-term delayed short-circuit release
- .. -A
With integrated under voltage release
Rated voltage
690 .. 690V
Rated permanent current Iu
800A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
50kA
Overload release current setting
320.0 .. 800A
Adjustment range undelayed short-circuit release
1200.0 .. 12000A
Integrated earth fault protection
Type of electrical connection of main circuit
Connection at separate chassis part
Device construction
Built-in device slide-in technique (withdrawable)
Number of auxiliary contacts as normally open contact
0
Suitable for DIN rail (top hat rail) mounting
Number of auxiliary contacts as normally closed contact
0
DIN rail (top hat rail) mounting optional
Number of auxiliary contacts as change-over contact
4
Number of poles
3
Type of control element
Push button
With switched-off indicator
Position of connection for main current circuit
Connection at separate chassis part
Complete device with protection unit
Motor drive integrated
Degree of protection (IP)
IP30
Motor drive optional
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user.