1SDA072102R1 | E1.2C 800 EKIP DIP LSI 3P WMP
Code: 1614918
Details
- •Low-voltage industrial components
- •Power circuit-breaker for trafo/generator/installation protection
- •1 KOM
- •ABB
Technical specifications
Number of auxiliary contacts as normally closed contact0
Number of auxiliary contacts as normally open contact0
Motor drive optionalYes
With under voltage releaseNo
Adjustment range undelayed short-circuit release1200.0 - 12000A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz50kA
Position of connection for main current circuitConnection at separate chassis part
DIN rail (top hat rail) mounting optionalNo
Device constructionBuilt-in device slide-in technique (withdrawable)
Rated permanent current Iu800A
Number of auxiliary contacts as change-over contact4
Rated voltage690 - 690V
Type of control elementPush button
Suitable for DIN rail (top hat rail) mountingNo
Overload release current setting320.0 - 800A
Type of electrical connection of main circuitConnection at separate chassis part
Degree of protection (IP)IP30
With switched-off indicatorYes
Number of poles3
Complete device with protection unitYes
Motor drive integratedNo
Integrated earth fault protectionNo
Adjustment range short-term delayed short-circuit release480.0 - 8000A
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user
1SDA072102R1 | E1.2C 800 EKIP DIP LSI 3P WMP
Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- ABB
DetailsTechnical specifications
Technical specifications
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
0
Motor drive optional
With under voltage release
Adjustment range undelayed short-circuit release
1200.0 .. 12000A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
50kA
Position of connection for main current circuit
Connection at separate chassis part
DIN rail (top hat rail) mounting optional
Device construction
Built-in device slide-in technique (withdrawable)
Rated permanent current Iu
800A
Number of auxiliary contacts as change-over contact
4
Rated voltage
690 .. 690V
Type of control element
Push button
Suitable for DIN rail (top hat rail) mounting
Overload release current setting
320.0 .. 800A
Type of electrical connection of main circuit
Connection at separate chassis part
Degree of protection (IP)
IP30
With switched-off indicator
Number of poles
3
Complete device with protection unit
Motor drive integrated
Integrated earth fault protection
Adjustment range short-term delayed short-circuit release
480.0 .. 8000A
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user.