1SDA072723R1 | E1.2B 800 EKIP DIP LSIG 4P WMP
Code: 1615429
Details
- •Low-voltage industrial components
- •Power circuit-breaker for trafo/generator/installation protection
- •1 KOM
- •ABB
Technical specifications
With integrated under voltage releaseNo
Rated permanent current Iu800A
Rated voltage690 - 690V
Adjustment range short-term delayed short-circuit release480.0 - 8000A
Number of auxiliary contacts as normally closed contact0
Integrated earth fault protectionYes
Adjustment range undelayed short-circuit release1200.0 - 12000A
Overload release current setting320.0 - 800A
Number of poles4
With switched-off indicatorYes
Suitable for DIN rail (top hat rail) mountingNo
DIN rail (top hat rail) mounting optionalNo
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz42kA
Type of electrical connection of main circuitConnection at separate chassis part
Device constructionBuilt-in device slide-in technique (withdrawable)
Complete device with protection unitYes
Type of control elementPush button
Motor drive integratedNo
Motor drive optionalYes
Degree of protection (IP)IP30
Position of connection for main current circuitConnection at separate chassis part
Number of auxiliary contacts as normally open contact0
Number of auxiliary contacts as change-over contact4
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user
1SDA072723R1 | E1.2B 800 EKIP DIP LSIG 4P WMP
Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- ABB
DetailsTechnical specifications
Technical specifications
With integrated under voltage release
Rated permanent current Iu
800A
Rated voltage
690 .. 690V
Adjustment range short-term delayed short-circuit release
480.0 .. 8000A
Number of auxiliary contacts as normally closed contact
0
Integrated earth fault protection
Adjustment range undelayed short-circuit release
1200.0 .. 12000A
Overload release current setting
320.0 .. 800A
Number of poles
4
With switched-off indicator
Suitable for DIN rail (top hat rail) mounting
DIN rail (top hat rail) mounting optional
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
42kA
Type of electrical connection of main circuit
Connection at separate chassis part
Device construction
Built-in device slide-in technique (withdrawable)
Complete device with protection unit
Type of control element
Push button
Motor drive integrated
Motor drive optional
Degree of protection (IP)
IP30
Position of connection for main current circuit
Connection at separate chassis part
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as change-over contact
4
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user.