1SDA072785R1 | E1.2N 1000 EKIP TOUCH LSI 4P WMP
Code: 1615481
Details
- •Low-voltage industrial components
- •Power circuit-breaker for trafo/generator/installation protection
- •1 KOM
- •ABB
Technical specifications
With integrated under voltage releaseNo
Rated permanent current Iu1000A
Adjustment range short-term delayed short-circuit release600.0 - 10000A
Rated voltage690 - 690V
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz66kA
Integrated earth fault protectionNo
Type of electrical connection of main circuitConnection at separate chassis part
Number of auxiliary contacts as normally closed contact0
Suitable for DIN rail (top hat rail) mountingNo
Number of auxiliary contacts as normally open contact0
Number of auxiliary contacts as change-over contact4
Complete device with protection unitYes
Number of poles4
Adjustment range undelayed short-circuit release1500.0 - 15000A
Overload release current setting400.0 - 1000A
Motor drive integratedNo
Device constructionBuilt-in device slide-in technique (withdrawable)
Type of control elementPush button
With switched-off indicatorYes
DIN rail (top hat rail) mounting optionalNo
Position of connection for main current circuitConnection at separate chassis part
Degree of protection (IP)IP30
Motor drive optionalYes
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user
1SDA072785R1 | E1.2N 1000 EKIP TOUCH LSI 4P WMP
Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- ABB
DetailsTechnical specifications
Technical specifications
With integrated under voltage release
Rated permanent current Iu
1000A
Adjustment range short-term delayed short-circuit release
600.0 .. 10000A
Rated voltage
690 .. 690V
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
66kA
Integrated earth fault protection
Type of electrical connection of main circuit
Connection at separate chassis part
Number of auxiliary contacts as normally closed contact
0
Suitable for DIN rail (top hat rail) mounting
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as change-over contact
4
Complete device with protection unit
Number of poles
4
Adjustment range undelayed short-circuit release
1500.0 .. 15000A
Overload release current setting
400.0 .. 1000A
Motor drive integrated
Device construction
Built-in device slide-in technique (withdrawable)
Type of control element
Push button
With switched-off indicator
DIN rail (top hat rail) mounting optional
Position of connection for main current circuit
Connection at separate chassis part
Degree of protection (IP)
IP30
Motor drive optional
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user.