1SDA072902R1 | E2.2N 1000 EKIP DIP LSI 4P WMP
Code: 1615578
Details
- •Low-voltage industrial components
- •Power circuit-breaker for trafo/generator/installation protection
- •1 KOM
- •ABB
Technical specifications
With integrated under voltage releaseNo
Rated voltage690 - 690V
Number of auxiliary contacts as change-over contact4
Integrated earth fault protectionNo
Adjustment range undelayed short-circuit release1500.0 - 15000A
Overload release current setting400.0 - 1000A
Adjustment range short-term delayed short-circuit release600.0 - 10000A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz66kA
Rated permanent current Iu1000A
Number of auxiliary contacts as normally closed contact0
Suitable for DIN rail (top hat rail) mountingNo
Number of poles4
Complete device with protection unitYes
Motor drive integratedNo
Device constructionBuilt-in device slide-in technique (withdrawable)
Type of control elementPush button
Type of electrical connection of main circuitConnection at separate chassis part
Degree of protection (IP)IP30
With switched-off indicatorYes
DIN rail (top hat rail) mounting optionalNo
Number of auxiliary contacts as normally open contact0
Motor drive optionalYes
Position of connection for main current circuitConnection at separate chassis part
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user
1SDA072902R1 | E2.2N 1000 EKIP DIP LSI 4P WMP
Details
- Low-voltage industrial components
- Power circuit-breaker for trafo/generator/installation protection
- 1 KOM
- ABB
DetailsTechnical specifications
Technical specifications
With integrated under voltage release
Rated voltage
690 .. 690V
Number of auxiliary contacts as change-over contact
4
Integrated earth fault protection
Adjustment range undelayed short-circuit release
1500.0 .. 15000A
Overload release current setting
400.0 .. 1000A
Adjustment range short-term delayed short-circuit release
600.0 .. 10000A
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz
66kA
Rated permanent current Iu
1000A
Number of auxiliary contacts as normally closed contact
0
Suitable for DIN rail (top hat rail) mounting
Number of poles
4
Complete device with protection unit
Motor drive integrated
Device construction
Built-in device slide-in technique (withdrawable)
Type of control element
Push button
Type of electrical connection of main circuit
Connection at separate chassis part
Degree of protection (IP)
IP30
With switched-off indicator
DIN rail (top hat rail) mounting optional
Number of auxiliary contacts as normally open contact
0
Motor drive optional
Position of connection for main current circuit
Connection at separate chassis part
*VPC is wholesale amount without VAT (tax on added value). For wholesale discounts, please register as business user.