
LED POWER BATTEN 1200 mm 50 W 4000 K
Code: 1933368

LED POWER BATTEN 1200 mm 50 W 4000 K

Suitable for wall mounting
Suitable for suspended mounting
Suitable for ceiling mounting
Suitable for built-in mounting
With light source
Suitable for workplace according to EN 12464-1
Suitable for surface mounting
Suitable for number of lamps
-
Suitable for light line configuration
Material housing
Steel
Colour housing
White
Material cover
Plastic, opal
Voltage type
AC
Nominal voltage
220 .. 240V
Type of control gear
Electronic ballast
With control gear
LED nominal current at constant current
mA
Dimming 1-10 V
Dimming DSI
Dimming DMX
Dimming GPRS
Dimming 0-10 V
Dimming potentiometer (integrated)
Dimming mains voltage modulation
Dimming DALI
Dimming LineSwitch
Dimming manufacturer's proprietary system
Dimming Sine Wave Reduction
Dimming RF
Dimming Touch and Dim
Dimming Zigbee
Dimming phase cut-on
Dimming phase cut-off
Dimming programmable
Dimming with push-button
Light outlet
Direct
No dim function
Rated life time L80/B50 at 25 °C
-h
Degree of protection (IP)
IP20
Rated life time L70/B50 at 25 °C
-h
Rated life time L80/B10 at 25 °C
-h
Rated life time L90/B10 at 25 °C
-h
Rated life time L70/B10 at 25 °C
-h
Rated life time L90/B50 at 25 °C
-h
Impact strength
IK03
Dimming depending on control gear
Protection class
I
With movement sensor
Luminaire with limited surface temperature, sign "D“
Suitable for emergency lighting
Covering of the luminaire with thermally insulating material possible
With air slots
Suitable for lamp power
W
With light sensor
Max. system power
50.00W
Rated ambient temperature according to IEC62722-2-1
-20 .. +40°C
Colour temperature
4000 .. 4000K
Rated luminous flux according to IEC 62722-2-1
5100lm
Power factor
0.90
Colour of light
White
Luminaire efficacy
102lm/W
Width
82.00mm
Outer diameter
-mm
Height/depth
48.00mm
Built-in length
-mm
Length
1200.00mm
Colour rendering index CRI
80-89
Built-in height/depth
-mm
Built-in diameter
-mm
Built-in width
-mm
Type of wiring
Ending
Number of poles
3
Connection type
Push-in clamp
Conductor cross section
-mm²