
LED SWITCH BATTEN 900 mm 10 W 4000 K
Code: 1933374

LED SWITCH BATTEN 900 mm 10 W 4000 K

Suitable for wall mounting
Suitable for ceiling mounting
Suitable for surface mounting
Suitable for workplace according to EN 12464-1
With light source
Suitable for number of lamps
-
Material cover
Plastic, opal
Colour housing
White
Voltage type
AC
Suitable for built-in mounting
Nominal voltage
220 .. 240V
Suitable for suspended mounting
Material housing
Plastic
Suitable for light line configuration
Dimming 1-10 V
With control gear
Dimming DMX
Dimming potentiometer (integrated)
Type of control gear
Electronic ballast
Dimming LineSwitch
Dimming manufacturer's proprietary system
LED nominal current at constant current
mA
Dimming phase cut-on
Dimming phase cut-off
Dimming mains voltage modulation
Dimming Zigbee
Dimming GPRS
Dimming Sine Wave Reduction
Dimming with push-button
Dimming programmable
Dimming Touch and Dim
Dimming DSI
Dimming DALI
Dimming 0-10 V
Dimming RF
No dim function
Dimming depending on control gear
Light outlet
Direct
Rated life time L80/B50 at 25 °C
-h
Rated life time L80/B10 at 25 °C
-h
Degree of protection (IP)
IP20
Rated life time L70/B50 at 25 °C
30000h
Rated life time L90/B50 at 25 °C
-h
Impact strength
IK03
Protection class
II
Rated life time L90/B10 at 25 °C
-h
Rated life time L70/B10 at 25 °C
-h
Rated ambient temperature according to IEC62722-2-1
-20 .. +40°C
Suitable for lamp power
W
Luminaire with limited surface temperature, sign "D“
Colour of light
White
With light sensor
Height/depth
30.00mm
Luminaire efficacy
110lm/W
With air slots
Covering of the luminaire with thermally insulating material possible
Width
22.00mm
Suitable for emergency lighting
Power factor
0.5
With movement sensor
Colour temperature
4000 .. 4000K
Outer diameter
-mm
Max. system power
10.00W
Built-in length
-mm
Length
873.00mm
Rated luminous flux according to IEC 62722-2-1
1100lm
Colour rendering index CRI
80-89
Built-in diameter
-mm
Number of poles
2
Built-in width
-mm
Conductor cross section
-mm²
Built-in height/depth
-mm
Type of wiring
Ending