
ENDURA® CLASSIC LANTERN CYLINDER E27 WD
Code: 1933490

ENDURA® CLASSIC LANTERN CYLINDER E27 WD

Suitable for wall mounting
Suitable for built-in mounting
Suitable for workplace according to EN 12464-1
Suitable for surface mounting
Suitable for light line configuration
Suitable for ceiling mounting
With light source
Nominal voltage
220 .. 240V
Voltage type
AC
Suitable for number of lamps
1
Lamp holder
E27
Material housing
Aluminium
Suitable for suspended mounting
Dimming DMX
With control gear
Dimming DSI
Dimming potentiometer (integrated)
Dimming phase cut-off
Dimming DALI
Dimming phase cut-on
Dimming 1-10 V
Dimming manufacturer's proprietary system
Dimming LineSwitch
LED nominal current at constant current
mA
Dimming mains voltage modulation
Dimming Sine Wave Reduction
Dimming Zigbee
Dimming RF
Dimming Touch and Dim
Dimming GPRS
Dimming with push-button
Dimming 0-10 V
Dimming programmable
Dimming depending on control gear
No dim function
Light outlet
Direct
Rated life time L70/B50 at 25 °C
-h
Degree of protection (IP)
IP43
Rated life time L80/B50 at 25 °C
-h
Protection class
I
Rated life time L90/B50 at 25 °C
-h
Rated life time L70/B10 at 25 °C
-h
Rated life time L80/B10 at 25 °C
-h
Rated life time L90/B10 at 25 °C
-h
With light sensor
Suitable for emergency lighting
With movement sensor
Covering of the luminaire with thermally insulating material possible
Rated ambient temperature according to IEC62722-2-1
-20 .. +40°C
With air slots
Rated luminous flux according to IEC 62722-2-1
-lm
Max. system power
-W
Colour temperature
K
Power factor
-
Luminaire with limited surface temperature, sign "D“
Width
118.00mm
Luminaire efficacy
-lm/W
Length
210.00mm
Outer diameter
118.0mm
Built-in length
-mm
Height/depth
212.00mm
Suitable for lamp power
W
Built-in diameter
-mm
Connection type
Screwed terminal
Number of poles
3
Built-in width
-mm
Conductor cross section
-mm²
Type of wiring
Ending
Built-in height/depth
-mm