Colour rendering index CRI80-89
Conductor cross section-mm²
Type of control gearElectronic ballast
Suitable for suspended mountingNo
Material coverPlastic, opal
Luminaire with limited surface temperature, sign "D“No
Suitable for workplace according to EN 12464-1No
Suitable for number of lamps-
Degree of protection (IP)IP55
Suitable for wall mountingNo
Covering of the luminaire with thermally insulating material possibleNo
Connectable conductor cross sectionmm²
Colour temperature4000 - 4000K
Rated life time L80/B50 at 25 °C-h
Rated life time L90/B50 at 25 °C-h
AdjustabilityRotating and swivelling
Rated life time L90/B10 at 25 °C-h
Rated life time L70/B50 at 25 °C30000h
Photobiological safety according to EN 62471RG1
Colour consistency (McAdam ellipse)SDCM6
Suitable for light-track mountingNo
Rated life time L70/B10 at 25 °C-h
Rated ambient temperature according to IEC62722-2-1-20 - 40°C
Total harmonic distortion-
Suitable for clamp-mountingNo
Rated life time L80/B10 at 25 °C-h
Suitable for traverse mountingNo
Luminous flux1500 - 1500lm
Suitable for pedestal/floor mountingNo
Rated luminous flux according to IEC 62722-2-11500lm
LED nominal current at constant currentmA
Dimming mains voltage modulationNo
Dimming manufacturer's proprietary systemNo
Dimming potentiometer (integrated)No
Dimming Sine Wave ReductionNo
Dimming with push-buttonNo
Dimming depending on control gearNo
Suitable for low voltage cable systemNo
Suitable for ceiling mountingNo
Nominal voltage220 - 240V
Suitable for built-in mountingNo
Suitable for surface mountingYes