
ENDURA® PRO SPOT SENSOR 16 W 1500 840 IP55 DG
Code: 1933534

ENDURA® PRO SPOT SENSOR 16 W 1500 840 IP55 DG

Suitable for suspended mounting
Suitable for surface mounting
Suitable for built-in mounting
Suitable for wall mounting
Suitable for pedestal/floor mounting
Suitable for ceiling mounting
Suitable for light-track mounting
Suitable for clamp-mounting
Suitable for low voltage cable system
Adjustability
Rotating and swivelling
With movement sensor
Suitable for traverse mounting
With light sensor
With light source
Suitable for number of lamps
-
Material housing
Plastic
Material cover
Plastic, opal
Surface brushed
Nominal voltage
220 .. 240V
Dimming depending on control gear
LED nominal current at constant current
mA
Dimming 0-10 V
Dimming DMX
With control gear
Dimming DALI
Type of control gear
Electronic ballast
Dimming 1-10 V
Dimming GPRS
Dimming potentiometer (integrated)
Dimming manufacturer's proprietary system
Dimming mains voltage modulation
Dimming DSI
Voltage type
AC
Dimming LineSwitch
Dimming RF
Dimming phase cut-on
Dimming programmable
Dimming Touch and Dim
Dimming Sine Wave Reduction
Dimming phase cut-off
Dimming with push-button
No dim function
Dimming Zigbee
Reflector
None
Light outlet
Direct
Rated life time L70/B10 at 25 °C
-h
Total harmonic distortion
-
Rated life time L70/B50 at 25 °C
30000h
Rated life time L80/B50 at 25 °C
-h
Rated life time L80/B10 at 25 °C
-h
Rated life time L90/B50 at 25 °C
-h
Impact strength
IK05
Protection class
II
Degree of protection (IP)
IP55
Max. system power
16.00W
Colour rendering index CRI
80-89
Colour temperature
4000 .. 4000K
Luminous flux
1500 .. 1500lm
Rated life time L90/B10 at 25 °C
-h
Lamp efficacy
-lm/W
Luminous intensity
-cd
Power factor
0.85
Rated ambient temperature according to IEC62722-2-1
-20 .. +40°C
Width
58.00mm
Colour of light
White
Rated luminous flux according to IEC 62722-2-1
1500lm
Suitable for lamp power
W
Outer diameter
-mm
Height/depth
187.00mm
Length
177.00mm
Built-in diameter
-mm
Built-in width
-mm
Built-in height/depth
-mm
Built-in length
-mm
Type of wiring
Ending
Number of poles
3
Conductor cross section
-mm²
Connectable conductor cross section
mm²
Luminaire efficacy
86lm/W
Suitable for workplace according to EN 12464-1
Colour consistency (McAdam ellipse)
SDCM6
Covering of the luminaire with thermally insulating material possible
Photobiological safety according to EN 62471
RG1
Luminaire with limited surface temperature, sign "D“