Connection typePush-in clamp
Type of control gearElectronic ballast
Colour rendering index CRI80-89
Conductor cross section-mm²
Covering of the luminaire with thermally insulating material possibleNo
Suitable for number of lamps-
Suitable for wall mountingNo
Material housingAluminium
Degree of protection (IP)IP44
Luminaire with limited surface temperature, sign "D“No
Suitable for workplace according to EN 12464-1No
Suitable for suspended mountingNo
Connectable conductor cross sectionmm²
Suitable for traverse mountingNo
Suitable for pedestal/floor mountingNo
Colour temperature3000 - 3000K
Luminous flux1700 - 1700lm
Rated life time L90/B10 at 25 °C-h
Colour consistency (McAdam ellipse)SDCM6
Rated life time L70/B50 at 25 °C-h
Rated luminous flux according to IEC 62722-2-11700lm
Total harmonic distortion-
Rated life time L80/B50 at 25 °C-h
Rated life time L70/B10 at 25 °C-h
Rated life time L80/B10 at 25 °C-h
Suitable for clamp-mountingNo
Suitable for light-track mountingNo
Rated life time L90/B50 at 25 °C-h
Photobiological safety according to EN 62471RG1
LED nominal current at constant currentmA
Dimming potentiometer (integrated)No
Dimming depending on control gearNo
Dimming mains voltage modulationNo
Dimming Sine Wave ReductionNo
Rated ambient temperature according to IEC62722-2-1-10 - 40°C
Dimming with push-buttonNo
Dimming manufacturer's proprietary systemNo
Suitable for ceiling mountingNo
Suitable for low voltage cable systemNo
Nominal voltage220 - 240V
Suitable for built-in mountingNo
Suitable for surface mountingYes