Conductor cross section-mm²
Connection typePush-in clamp
Type of control gearElectronic ballast
Colour rendering index CRI80-89
Suitable for suspended mountingNo
Material housingAluminium
Degree of protection (IP)IP44
Suitable for number of lamps-
Luminaire with limited surface temperature, sign "D“No
Covering of the luminaire with thermally insulating material possibleNo
Suitable for wall mountingNo
Suitable for light-track mountingNo
Suitable for workplace according to EN 12464-1No
Colour temperature4000 - 4000K
Suitable for pedestal/floor mountingNo
Rated luminous flux according to IEC 62722-2-1800lm
Connectable conductor cross sectionmm²
Suitable for clamp-mountingNo
Suitable for traverse mountingNo
Rated life time L90/B50 at 25 °C-h
Rated life time L80/B50 at 25 °C-h
Rated life time L80/B10 at 25 °C-h
Rated life time L70/B10 at 25 °C-h
Rated life time L70/B50 at 25 °C-h
Rated life time L90/B10 at 25 °C-h
Rated ambient temperature according to IEC62722-2-1-10 - 40°C
Photobiological safety according to EN 62471RG1
Colour consistency (McAdam ellipse)SDCM6
Total harmonic distortion-
LED nominal current at constant currentmA
Dimming potentiometer (integrated)No
Dimming with push-buttonNo
Dimming manufacturer's proprietary systemNo
Dimming mains voltage modulationNo
Dimming Sine Wave ReductionNo
Suitable for low voltage cable systemNo
Suitable for ceiling mountingNo
Dimming depending on control gearNo
Nominal voltage220 - 240V
Suitable for built-in mountingNo
Suitable for surface mountingYes