Conductor cross section1.5mm²
Connection typePush-in clamp
Suitable for wall mountingYes
Colour rendering index CRI80-89
Surface protectionPowder coating
Type of control gearLED operating device current-controlled
Lamp typeLED not exchangeable
Suitable for suspended mountingNo
Material housingAluminium
Degree of protection (IP)IP66
Emergency power supply integratedNo
Material coverGlass structured
Covering of the luminaire with thermally insulating material possibleNo
Luminaire with limited surface temperature, sign "D“No
Suitable for number of lamps6
Connectable conductor cross section1.5 - 1.5mm²
Suitable for workplace according to EN 12464-1No
Beam angleExtreme wide beam >80°
Colour temperature3000 - 3000K
Nominal current700 - 700mA
Suitable for pedestal/floor mountingYes
Rated luminous flux according to IEC 62722-2-115600lm
Suitable for traverse mountingYes
Constant light output (CLO)No
Suitable for light-track mountingNo
Suitable for clamp-mountingNo
IFTTT support availableNo
Rated ambient temperature according to IEC62722-2-1-25 - 40°C
Luminous flux15600 - 15600lm
Photobiological safety according to EN 62471RG0
Colour consistency (McAdam ellipse)SDCM3
Dimming manufacturer's proprietary systemNo
Dimming potentiometer (integrated)No
Unified Glare Ratio (UGR)25
Light distributorFocal lens
Suitable for low voltage cable systemNo
Dimming mains voltage modulationNo
Compatible with Apple HomeKitNo
Luminaire efficacy105lm/W
Dimming Sine Wave ReductionNo
Dimming with push-buttonNo
Suitable for ceiling mountingYes
Exchangeable control gearNo
Colour temperature adjustableNo
Compatible with Google AssistantNo
Luminous flux adjustablePositions
Compatible with Amazon AlexaNo
Nominal voltage220 - 240V
Suitable for built-in mountingNo
Suitable for surface mountingNo