Connection typePush-in clamp
Material housingAluminium
Colour rendering index CRI80-89
Suitable for suspended mountingNo
Conductor cross section1.5mm²
Type of control gearLED operating device current-controlled
Surface protectionPowder coating
Suitable for wall mountingYes
Lamp typeLED not exchangeable
Emergency power supply integratedNo
Material coverGlass structured
Covering of the luminaire with thermally insulating material possibleNo
Luminaire with limited surface temperature, sign "D“No
Connectable conductor cross section1.5 - 1.5mm²
Beam angleWide beam 41-80°
Colour temperature4000 - 4000K
Suitable for number of lamps6
Suitable for workplace according to EN 12464-1No
Nominal current700 - 700mA
Degree of protection (IP)IP66
Suitable for traverse mountingYes
Rated luminous flux according to IEC 62722-2-115800lm
Suitable for pedestal/floor mountingYes
Suitable for light-track mountingNo
Constant light output (CLO)No
Luminous flux15800 - 15800lm
Colour consistency (McAdam ellipse)SDCM3
Suitable for clamp-mountingNo
Dimming potentiometer (integrated)No
Dimming mains voltage modulationNo
Dimming manufacturer's proprietary systemNo
IFTTT support availableNo
Dimming Sine Wave ReductionNo
Photobiological safety according to EN 62471RG0
Dimming with push-buttonNo
Rated ambient temperature according to IEC62722-2-1-25 - 40°C
Suitable for low voltage cable systemNo
Luminaire efficacy107lm/W
Suitable for ceiling mountingYes
Colour temperature adjustableNo
Unified Glare Ratio (UGR)28
Compatible with Apple HomeKitNo
Compatible with Google AssistantNo
Luminous flux adjustablePositions
Exchangeable control gearNo
Compatible with Amazon AlexaNo
Light distributorFocal lens
Nominal voltage220 - 240V
Suitable for built-in mountingNo
Suitable for surface mountingNo