Conductor cross section1.5mm²
Connection typePush-in clamp
Type of control gearLED operating device current-controlled
Colour rendering index CRI80-89
Suitable for wall mountingYes
Covering of the luminaire with thermally insulating material possibleNo
Material coverGlass structured
Degree of protection (IP)IP66
Lamp typeLED not exchangeable
Luminaire with limited surface temperature, sign "D“No
Material housingAluminium
Suitable for suspended mountingNo
Emergency power supply integratedNo
Surface protectionPowder coating
Connectable conductor cross section1.5 - 1.5mm²
Photobiological safety according to EN 62471RG0
Suitable for clamp-mountingNo
Suitable for workplace according to EN 12464-1No
Suitable for traverse mountingYes
Colour consistency (McAdam ellipse)SDCM3
Suitable for pedestal/floor mountingYes
Constant light output (CLO)No
Rated luminous flux according to IEC 62722-2-112700lm
Beam angleExtreme wide beam >80°
Nominal current700 - 700mA
Colour temperature4000 - 4000K
Suitable for light-track mountingNo
Luminous flux12700 - 12700lm
IFTTT support availableNo
Rated ambient temperature according to IEC62722-2-1-25 - 50°C
Suitable for number of lamps6
Dimming manufacturer's proprietary systemNo
Dimming mains voltage modulationNo
Dimming potentiometer (integrated)No
Compatible with Google AssistantNo
Unified Glare Ratio (UGR)22
Compatible with Apple HomeKitNo
Luminaire efficacy113lm/W
Dimming Sine Wave ReductionNo
Suitable for low voltage cable systemNo
Dimming with push-buttonNo
Light distributorFocal lens
Suitable for ceiling mountingYes
Colour temperature adjustableNo
Exchangeable control gearNo
Compatible with Amazon AlexaNo
Luminous flux adjustablePositions
Nominal voltage220 - 240V
Suitable for built-in mountingNo
Suitable for surface mountingNo