Conductor cross section1.5mm²
Surface protectionPowder coating
Connection typePush-in clamp
Suitable for wall mountingYes
Type of control gearLED operating device current-controlled
Colour rendering index CRI80-89
Suitable for suspended mountingNo
Material housingAluminium
Suitable for workplace according to EN 12464-1No
Light sharingSymmetric/asymmetric
Luminaire with limited surface temperature, sign "D“No
Lamp typeLED not exchangeable
Emergency power supply integratedNo
Covering of the luminaire with thermally insulating material possibleNo
Suitable for number of lamps6
Material coverGlass structured
Degree of protection (IP)IP66
Connectable conductor cross section1.5 - 1.5mm²
Beam angleExtreme wide beam >80°
Colour temperature4000 - 4000K
Luminous flux22200 - 22200lm
Rated luminous flux according to IEC 62722-2-122200lm
Suitable for light-track mountingNo
Suitable for clamp-mountingNo
Suitable for pedestal/floor mountingYes
Constant light output (CLO)No
IFTTT support availableNo
Nominal current900 - 900mA
Suitable for traverse mountingYes
Colour consistency (McAdam ellipse)SDCM3
Rated ambient temperature according to IEC62722-2-1-25 - 50°C
Dimming manufacturer's proprietary systemNo
Photobiological safety according to EN 62471RG0
Dimming potentiometer (integrated)No
Dimming mains voltage modulationNo
Dimming Sine Wave ReductionNo
Light distributorFocal lens
Dimming with push-buttonNo
Luminaire efficacy106lm/W
Compatible with Google AssistantNo
Compatible with Apple HomeKitNo
Suitable for ceiling mountingYes
Exchangeable control gearNo
Colour temperature adjustableNo
Suitable for low voltage cable systemNo
Unified Glare Ratio (UGR)28
Compatible with Amazon AlexaNo
Luminous flux adjustablePositions
Nominal voltage220 - 240V
Suitable for built-in mountingNo
Suitable for surface mountingNo